Saturday, 12 January 2008

तारें ज़मीन पर

main kabhii batalaataa nahiin
par andhere se dartaa hoon main maan ...
yoon to main ,dhiklaataa nahiin
terii paravaah karataa hoon main maan ...
thuje sab hain pataa , hain n maan
thuje sab hain pataa, merii maan...


Bheed Mein Yun Na Chodo Mujhe
Ghar Laut Ke Bhi Aa Naa Paoon Maa
Bhej Na Itna Door Mujkko Tu
Yaad Bhi Tujhko Aa Naa Paoon Maa
Kya Itna Bura Hoon Main Maa
Kya Itna Bura Meri Maa


Jab Bhi Kabhi Papa Mujhe
Jo Zor Se Jhoola Jhulate Hain Maa
Meri Nazar Dhoondhe Tujhe
Sochu Yahi Tu Aa Ke Thaamegi Maa
Unse Main Yeh Kehta Nahin
Par Main Seham Jaata Hoon Maa
Chehre Pe Aana Deta Nahin
Dil Hi Dil Mein Ghabraata Hoon Maa


Tujhe Sab Hai Pata Hai Naa Maa
Tujhe Sab Hai Pata Meri Maa
Main Kabhi Batlata Nahin
Par Andhere Se Darta Hoon Main Maa
Yun To Main,Dikhlata Nahin
Teri Parwaah Karta Hoon Main Maa
Tujhe Sab Hain Pata, Hain Na Maa
Tujhe Sab Hain Pata,,Meri maan

http://www.youtube.com/watch?v=tlIOLtQ_D1s

Posted by VENKAT at 7:45 pm

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

TODAY's DISCUSSION ON MAINFRAMES

NOTION OF LOGICAL LEVELS WITH LINK XCTL AND RETURN!!

The CICS Terminal Control is the highest level and is considered to be running at LEVEL 0.The first initiated one by entering the TRAN-ID is said to be at LEVEL 1. If PROGRAM-A at LEVEL 1 is calling PROGRAM-B using the LINK command, then PROGRAM-B is considered to be at LEVEL 2 as both PROGRAM-A and PROGRAM-B will both be loaded in MAIN STAORAGE. If PROGRAM-C is called by PROGRAM-A using the XCTL command, then, PROGRAM-C is said to be at LEVEL 1 as PROGRAM-A will be removed from MAIN STORAGE after loading PROGRAM-C. The options that are used with LINK and XCTL commands are PROGRAM, COMMAREA and LENGTH. RETURN command is used to transfer control from one logical level to the level one above it.A RETURN command at logical LEVEL 1 (only at LEVEL 1) can have the options TRANSID, COMMAREA and LENGTH to initiate a new TRANSACTION once the control is passed to the CICS.The RETURN command at all other logical levels should be issued without any options.

SOME MORE DOSE

LINK is used to transfer control from an application program at one logical level to an application program at the next lower logical level. If the LINKED to program is not already in the MAIN storage, it will be loaded. When the RETURN command is executed in the LINKED to program, control is returned to the program initiating the LINKAGE at the next sequential executable instructions. XCTL is used to transfer control from one application program to another application at the same logical level. The program which control is transferred is released. If the program to which control is transferred is not already in the memory, it will be loaded.

SEND A MAIL TO ME FOR QUERIES AND SUGGESTIONS